Bottle/Can Handle

Description

Bottle/Can/Thermo Handle with Voronoi pattern. ( It can be customised, available parametric Fusion 360 design)
 

Supports are needed

STLs

The availabel Stls are for bottles/Cans/thermos of the following diameters: 96,3mm , 98,9mm , 80,1mm (Spreequell bottles), 66,25 mm (500ml cans)

Customize your own!

Do you need a handle sleeve for your favourite bottle/Can/thermo, you name it. Here there is a simple parametric design that you can adapt without much effort to your needs.
 

In order to edit the design download and open the fusion file. Once loaded, open the parameter control window: “Modify> (fx) Change parameters”

Handle height → Sets the position of the handle ( distance from the bottom of the sleeve)

Handle gap → Is the width of the handle gap 

Personalize the patter or add your own drawing

The SLEEVE_CANVAS_FRAME, can be used to  add your own patter or SVG drawing. The size is adjusted automatically to make sure that the drawing fits on the sleeve.

In order to imprint your own patter or drawing, you need to modify the Emboss function, it can be found in the design timeline.

Comments

Modifying the  size can affect to some roundings:

Do not worry if the rounding operation goes red, the affected rounding it is not essential.

Enjoy the model!

Remember to add your makes. I'm looking forward to see them and get some feedback :)