February 13, 2025
Description
Remix of this great Yi/Kami camera mount to work with more cables and rotate in 4 directions.
Faceplate is "keyhole" shaped with a cutout at the bottom to allow bigger microusb cables to work with the camera. Even backwards ones! I've also removed extra material to reduce filament usage and print time.
The extra joint allows the camera to be rotated side to side as well as up and down.
I didn't need to mount in a corner, so instead I use a flat mounting plate which is the size of 2x large command strips. If you don't need to use the extra joint, I've also included a mounting plate with the hinge rotated.
As with the original, this uses M3x20mm bolts and M3 nuts.
The parts with the 3-prong hinge need supports, the rest do not. When fitting things together the tolerances are tight, but this makes it very stable.
License:
Creative Commons — Attribution — Noncommercial — Share Alike