DeepCool CH160 Side Panel - 3.5mm squares

I replaced DeepCool CH160 glass panel with this design which replicates the 3.5mm squares on the rest of the PC case. I printed this on BL P1S and split the print down the center. I added butterfly clips which are used to keep the two panels joined on the inside of the panel with some glue. It seems solid enough. There are two clips on the right hand side of the panel which need to be bent with a little bit of heat - I used a hair drier. If you look at your existing glass panel, it should match the same bend which is about 2.5 mm high.  You can see in the pictures it works really well to hide the 280mm AIO which is side mounted where the glass panel used to be.