February 11, 2025
Description
If you want a hole in the bookmark, add a negative part (cylinder) and adjust his size and position in the model. In the print project, the negative part is inserted.
Model size is 50x150mm and 65x200mm. When changing dimensions, you must not change the height (Z).
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments Used:
PLA Elegoo + Black Transmission Distance: 0.3
PLA Devil Design Dark Red Transmission Distance: 3.4
PLA Sunlu META Grey Transmission Distance: 3.6
PLA Elegoo + White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Red
At layer #9 (0.8mm) swap to Grey
At layer #11 (0.96mm) swap to White for the rest.
License:
Standard Digital File License
fD667
