Flipper Zero Pogo Pin Cover

I kept pulling my Flipper from my pocket and the Pogo Pins would get snagged.

This is a cover for the Pogo Pins and fits over each pin and eliminates it getting snagged.
You must be using the silicone cover for this to work.

I printer in petg 1.5  10% infill 

This has proven to be a bit of a pain to print; and maintain a nice surface finish on both sides. I have printed it upside down to make sure the outside has the best surface finish, and just deal with the supports. If you use a raft you should be able to pull most the support off with the raft.