Ultra Ball | Hyperball | Fanart | Pokemon inspired

Check our my MakerWorld for more free models: https://makerworld.com/en/@mishirostudio 

Self-designed Ultra Ball for the 3D printer

Dimensions
I have invested a lot of research and time to achieve the most realistic proportions possible. The diameter is 75mm so that it fits well in the hand.
 

Assembly
The ball consists of a total of 9 individual parts that are glued together. Optionally, the lid can simply be attached so that the ball can be used as a storage box
 

Additional supports
To ensure that the bow is printed without errors, I recommend printing the bow-shaped supports. These are 0.1 mm away from the actual shell of the ball so that they can be easily removed after printing by bending them. In my test prints, I have found that this produces better results than the conventional supports.
 

Do you need a stand for the Ultra Ball? Take a look at this file: https://www.printables.com/model/1188646-stand-for-pokeball