Pinecil Remix of TStation

This is a remix of spTim's fantastic soldering station for the TS80p. I have a Pinecil soldering iron, so I made a bunch of updates to the original design so that it will work with the Pinecil.

iron holder - Pinecil.stl I updated this so it will hold the slightly square shape of the Pinecil securely. I started with this design for the holder piece, and updated it so it would fit in the soldering station. I had to move it slightly to the left and slice a little from the top so that everything would fit when you close the box.

left - Pinecil.stl I made a slight change to the area just above the iron holder. I removed a little of the lip so that I could have the iron holder piece be as tall as possible in this case.

right - Pinecil.stl I made some major updates to this piece since it was originally made to fit the TS80p. I pulled the Pinecil body and tip holder from this design, as that design already held both pieces very securely. I changed it slightly so that I could keep the hole inserts at the edge of this part, since I like the extra security that adds when closed.

main - Pinecil.stl This is optional for you to print. I made some changes for my specific use-case. The charger I used was slightly larger than the one spTim used, so I increased the size of that space. I also removed the divider in the accessory bin so that my USB-C charging cable fits in it.

You'll have to grab the other pieces from the original version of this box. Hope you enjoy this!!