A hand-knob for M6 bolts (10mm hex-head)

The molded on knob for my Halot Mage that holds the print plate in place fell apart after exposure to denatured alcohol for too long (go figure…I thought that they would use something chemical resistant to a common resin cleaning chemical…).

Knocked out a new design in Fusion quickly. Works very well and fits perfect the first time. Uses a removeable snap in retention cap piece to keep the bolt in place.

I'd recommend at least 5 perimeter walls if you want the portion holding the hex head of the bolt to handle high torque.

I printed the example in ASA with 5 perimeters and 20% infill.