Thermaltake T600 bezel for Turzx 8.8" sensor panel

This is a replacement panel for the Thermaltake T600 tower pc case. The case comes with a second panel to use with the Thermaltake LCD, but that screen is much smaller. This bezel is designed to match the clips and protrusions on the pc case, and I tried to shape it to the case style as well. There are two holes in the rear of the bezel if you wish to add 6x3mm magnets (not shown in pictures), following the style of the other panels on the case. I did not test them, but left them a touch oversized to account for epoxy and printing discrepancies. The printed pins have so far held up fine. 

The interior face where the lcd panel sits has 1mm raised bumps on each edge, to help the screen snug into place. If you find the panel is too tight, you can try shaving off the bumps to gain some room. I printed my version from white ABS, and I used a 6mm outer and 3mm inner brim to keep the part from warping while printing. I will eventually try priming and painting it to match the color of the case.  If you haven't bought a Turing screen yet, note that I purchased a white one due to my case color. The metal bezel may show color inside the frame hole, so consider a black version if you have a dark case color.

 I hope you find this useful; I feel having the LCD panel there completes the look of the case. If you create themes for your Turzx, be sure to show them off in the infopanel discord!