Freestanding photo frame

This is simple freestanding photo frame in two variants for landscape and portrait photo.

Print settings - in brackets settings for the back part:

• Layer height: 0.2 mm
• Perimeters: 3
• Solid layers - top/bottom: 5 / 5 (4 / 3)
• Infill: 15% (10%)
• Supports: No
• Scarf joint placement: Contours
• Scarf joint length: 5mm
• Material: PLA
   

In files you will find frames for two sizes of photos in landscape and portrait orientation:

• 102 mm x 152 mm (4" x 6")
• 127 mm x 178 mm (5" x 7")

In case, when the photo is on thick base or you need space for protective sheet, the height of the back part could be reduced (cut) directly in slicer by up to 1.2 mm.

For more minimalistic phot frame see: https://www.printables.com/model/129443-picture-frame.