Sewing Machine Seam Guide with Double Magnet Slot - Keeps Fabric Straight & Holds Sewing Pins!

I designed a new version of the seam guide with two magnet slots. This one has a 5mm-wide edge to hold down thicker or fluffy fabric while sewing. I also found that with strong magnets, it works as a pin holder too!

Here’s what it does:

• Acts like a fence, keeping your fabric straight as it feeds through.
• Holds pins with the magnets as you sew.
• Presses down thicker or fluffy fabric ends when sewing with extra seam allowance.

Just add two strong magnets, and it’s ready to use!

Size:
   Width: 57.5 mm
   Height: 20.8 mm
   Thickness: 4.5 mm

STL files available in different magnet size: 

•  Ø 10 x h 2 mm 
•  Ø 10 x h 2.5 mm 
•  Ø 10 x h 3 mm 
•  Ø 8 x h 2 mm 
•  Ø 6 x h 3 mm 

Need a different size? Let me know in the comments!

Happy sewing! 😊

My Print Settings:

• Printer: Prusa MK4S
• Layer Height: 0.20mm
• Filament: PLA+
• Infill: 15%
• Supports: None
• Brim: None
   

If you're using OpenSCAD, you can grab the SCAD file and tweak the parameters to fit your needs.