Airpod Pro Case

I needed a new case so I decided to challenge myself and model a case. The bottom fits perfectly but the top might be a bit loose, I had some trouble with print quality (due to old filament) which left some small defects which might have made the fit tighter. If the fit is too loose let me know and I will fix it.

UPDATE: I fixed the top so it fits right now. (download the Airpod Case Top 2 file)

UPDATE (02/06/25): Added a new top that stays on way better ( Airpod Case Top 3 file)

I used 0.15 layer height because I wanted detail but 0.2 should do 

15% infill although this doesn't matter very much due to the print being so thin (only needed on the bottom corners)

3 walls for strength 

Support is needed for the top (I printed it upright so the top would be clean)

Support on the bottom might be needed for the miniature overhangs at the top of the hexagon pattern

Printed in PLA