Prusa XL Spool Holder Vertical Easy Removal

Since I don't have much space on left and right of the printer I needed some way to change spools vertically instead of horizontally. 

I designed a block that is mounted on the original spool holder and makes use of the same profile screw nut that comes with original spool holder.

This can be removed with ease vertically and can h  old even 2 kg spools.

I have made 3 versions for it.

1. Vertical T slot groove ( for middle and back T profile ) PrusaXL_suport_filament_printer_vertical
2. Horizontal T slot groove ( for top T profile ) PrusaXL_suport_filament_printer_horizontal
3. Horizontal T slot groove for front ( in case the original enclosure it's mounted and also acts as a alignment tool for the pull up accordion )  PrusaXL_suport_filament_printer_horizontal_handle

I also posted pictures of my orientations to have them strong. I did use supports to have them nice and clean. Infill you can use as much as you need but you will need to put in more perimeters to have it stronger. I did use 4 perimeters and it holds the 2 kg spools without any problem

Only extra things that are needed beside the original spool holder is 1 M4 nut and 1 M4X16 mm screw