Trench Hueforge | Twenty One Pilots

Trench Album Hueforge! |-/

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Gray
At layer #13 (1.12mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.
 

… or use the .3mf file ;)

If you're using an AMS with 4 slots, swap the black filament with the white one as soon as the black layers are finished, since this model uses 5 colors.