February 27, 2025
Description
I designed this spice rack to match the aesthetic of my pantry and to use some spare 1" x 3" boards I had. I think the combination of stained wood and black plastic looks really nice. I used a dark walnut stain and clear polyurethane finish on the wood.
The brackets print easily with no supports. I printed them in matte black PLA. In addition to the printed parts you'll need 1" x 3" (20mm x ~64mm) lumber cut to three equal lengths of your choice and six #6 (3.5mm) wood screws shorter than your board thickness.
The shelf to shelf rise is 38mm.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Eldarius
