February 10, 2026
Description
UPDATE!!! 2-10-2026 I have been notified that the rear rail was undersized, sorry to anyone that had issues please re download the new rear rail and see if that works! Thank you for printing my designs even though I suck at designing lol
WARNING, Haven't Printed yet, but wanted to pre-release.
TOP RAIL FIXED AS OF 2/20/2025
ADDED ANOTHER VARIATION OF THE SHELL in the 3mf, Rails and other components work with both!
Revamped the BLOCKORONI
Instead of heat stake inserts this uses M3 hex nuts.
Ive kinda scrapped the printing the rails at 45 idea, my original BLOCKORONI rails were printed flat and I havent had issues and it creates a low quality finish, my bad to those who tried to do it that way.
Rear Picatinny has 4 bolt holes now as well!
I designed it to use the same shell hardware as the Original.
Instead of head stakes use M3 Hex nuts. (Tweezers might help with assembly, idk if needed?)
All rails except side use M3x 8mm BHCS.
Side Rails use shorter M3x 3mm BHCS.
Recommend using Loctite.
Follow the original Guide for shell assembly, then use the screws and hex nuts to attach rails.
Optional Locking bar still uses Brass heat stakes.
3MF is easiest way to download open in Bambu or Orca
License:
Creative Commons — Public Domain
WrenchWorks3D
