Panel Wire Grommet With Slotted Opening - 1/2 inch thick, 3/4 inch long - with end cap nuts

I recently made an antenna connector passthrough panel for my window. I needed a 1/2" hole on one side of the panel and wanted to make a grommet that I could slide cables into that would stay put inside the hole. I ran my antenna wires through the slot that is cut out and stuffed some foam inside with the wires to create a weather seal from the outside.

It's for a 1/2" hole through a panel that is 3/4" thick.

UPDATE: I have added two files as an update. I tried to make the same type of setup, but with a bolt split in half for more strength.

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:** No

Supports:

**Resolution:** .20

Infill:

**Filament:** [ ](http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA&tag=thingiverse09-20)[ Hatchbox](https://www.amazon.com/s?k=hatchbox&linkCode=ll2&tag=thingiverse09-20&linkId=f798b0df863f056fa470f03a65697ff4&language=en_US&ref_=as_li_ss_tl) PLA White

Notes:

How I Designed This ===================

Category: Parts