January 17, 2022
Description
These were remixed from [1] but provide screw holes at both sides.
Available for cable diameters 4 mm, 6 mm and 8 mm. Intermediate cable diameters work perfectly if used in combination with a zip tie.
I used PLA and PETG with 0.2 mm layer height for printing.
Screw holes have a diameter of 3.5 mm, the countersinks suit screw heads with a diameter of 7 mm.
Other dimensions (cable diameter, screw dimensions, width, thickness - you name it …) are possible, just write in the comments if you're interested!
Update 2022-01-18: Added versions with smaller fillet radius for less overhangs when printing.
[1] https://www.thingiverse.com/thing:2798689 by sneaks
License:
Creative Commons — Attribution
Marcus
