Rockin' President Trump

Love him, hate him, you can't knock Donald Trump down.  Every push, every hit, he looks like he's about to go down and suddenly he pops right back up for more, rockin' thumbs up.

Donald Trump:

• Print orientation - Standing
• Layer height - 0.20
• Wall line count - 2
• Top layers - 4
• Bottom layers - 4
• *Infill density - 5%
• Infill pattern - Lightning. This is for minimal mass. 
• Support - Required
• Support Structure - Tree.  Tree supports provide least artifacting and easier removal.
• Build plate adhesion - None.
• Use Adaptive Layers - Yes.

Base:

• Print orientation - laying on flat side
• Layer height - 0.28
• Wall line count - 4
• Top layers - 4
• Bottom layers - 4
• *Infill density - 100%
• Infill pattern - Lines
• Support - Required
• Build plate adhesion - None
• Use Adaptive Layers - Yes.  Smoother surface for dome.

*Please note that the settings for the Base and Donald Trump are sensitive as the mass of Donald Trump must be a significant amount less than the mass of the Base.

After printing Donald Trump, the Base, and two pegs, insert pegs to align Donald Trump on the Base.  If done correctly, his shoe heels will be closer to the edge of the Base than his shoe toes.  Donald Trump will not balance correctly if his shoe toes are closer to the Base edge than his shoe heels.

After alignment is verified and all parts fit together, add a small amount of cyanoacrylate (Krazy Glue) to the bottom of the shoes to glue Donald Trump to the platform.