case for foldable glasses

This box is made from ASA and after assembling I smoothed it with acetone.
For the axis I used a 2mm brass tube instead of 2mm screws.

2x 2mm axles needed, 30mm width (screws or tube).
2x 2mm axles needed, 15mm width (screws or tube).

The box height is 2mm smaller then the glasses height, so this case captures the glasses and avoid grinding the glasses through slide around in the case.

Case made from rugged box.
TPU inlay made with prusa-slicer.

Print settings:
0,15mm detail, ASA
0,15mm detail, TPU 60A