Wanhao i3 CR-10 Extruder

This is designed to make use of a CR-10(MK8) hotend on a Wanhao i3, using this part as a carriage. The file you need isHemera_X_Carriage_360_V2.stl.

Last two pictures are print samples with flex filament, at 60mm/sec, with retraction enabled.

Print Settings

Supports:

Yes

Resolution: 

0.2

Infill:

20%+

Filament: - PETG/ABS 
 

Notes: 

Print objects in default orientation for best results.
Use supports on everything but standoffs.

PETG should be used for most parts since they are around hotend. ABS is suggested for print fan duct.

Post-Printing

Parts

CR-10 style hotend. I used/designed the parts around this one
https://grobotronics.com/all-metal-hotend-kit-with-heater-block-for-creality-cr-10-printers.html?sl=en
30x30x10 Fan for hotend cooling

5015 Blower Fan for print cooling

A few M3 hex nuts/bolts to secure everything together. Use a couple of zip ties to cable manage as well.

Use stock motor/extruder clamp.

Category: 3D Printer Extruders