Raspberry Pi case - swappable lids (3 Model B/Β+)

UPDATE 11/09: Added new top part version, with swappable lids.
Simple vented, can open up to remove or place ribbon cables on the Pi.
30x30 fan mount, 40x40 fan mount.
Mount the fans by regular M3/M4 bolts/nuts, depending on your fan size.
I suggest printing the lids in PETG, to give a bit of flex in order to be able to clip them in and out of place.

Yet another Rpi 3 case. I made it while designing my printer enclosure.
I needed a freestanding case, that didn't need require extra stuf to stay upright, while leaving all the necessary ports open, and with minimal extra hardware.
All ports are exposed, besides the screen CSI connector. You could possibly use the camera one on the bottom to pass both ribbons on the outside.

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK3

Rafts:

No

Supports: 

Doesn't Matter

Resolution:

0.2

Infill: 

10%
 

Notes: 

Use supports if you want the screw holes to be extra clean, don't if you just don't want to!

CAUTION: Make sure your printer is calibrated, and dimensional accuracy is great, tolerances are TIGHT.

Post-Printing

Assembly

Rpi sits nicely on his stands, held in place by the case itself.

Use four M3 nuts, and four M3x25 Hex bolts to secure the two parts together.

Make sure to remove the microSD card before placing the Rpi inside.

Category: Electronics