Remix Fake nut with internal magnet and keeper.

This is a redesign of just the nut. I have had some of these out in the field for 14 months now and what I have found is that no matter the glue I use the magnets always come loose. So I redesigned the nut to use 2 10mm x 2mm magnets internally with a friction fit keeper.

This is designed for printing in ABS since it seems hardier out in weather compared to PLA. Since abs does not use a part cooling fan there may be some slight sag. I have increased the dimensions of the magnet channel to compensate.Print with Threads facing up.

based on this original design
https://www.thingiverse.com/thing:639602

Print instructions

Category: Sport & Outdoors Print Settings

Printer Brand: Wanhao

Printer: Wanhao Duplicator i3 V2

Rafts: No

Supports: No

Resolution: 200

Infill: 15% with 2 steps (cura 2.6.2)

Notes:

Designed for ABS. May not work if printed in PLA.
Print with Threads facing up