This is a case for Heltec V3 that fits 2x 18650 batteries, this gives a good battery life of about 3 days and probably longer with sleeping.
Non printed parts
4x M3?? bolts of various sizes - I can't actually recall what size
The Good
- It can be painted to look like camo, cool!
- It takes 2x 18650 battery clips which means it works with flat top and button top batteries
- It might work without hot glue
The Bad
- I made this some time ago and my memory is vague on all the details you'll probably need
- It probably needs hot glue
- The bolt length is odd so when tightened they're too long and stick out, too short and they wont reach the nut
- The buttons pretty much require a resin printer but it might work with some careful sanding
- Its not waterproof despite the misleading gasket, just thought it looked cool
- Its a PITA to fit the antenna, you have to fit it first
- Be careful with the boards coax connector if you don't angle it correctly you're going to snap it off, there's a little channel to feed the feedline around so you don't strain it
The Ugly
- The solidworks file - Let me know if you have any issues with this and I'll spend the extra 20 minutes it was going to take to export it properly
Jonny No Stars
