Prusa Core One Feet for Threaded Stem Caster

This is a remix of the Prusa Core One Feet to mount threaded stem casters. I have designed versions for M10 and 3/8"-16. The casters are mounted using the printed threaded holes. I printed it from Prusament ASA Jet Black with a 0.6mm nozzle, Layer height 0.25mm, 20% gyroid infill, and 4 perimeters.

Required other than printed parts:

• 8x M3x16 mm (required to secure the foot to the printer)
• 4x M10 or 3/8"-16 threaded stem casters.

Print the following parts:

• 4x Feet parts 
  Print the model compatible with the threaded stem caster M10 or 3/8"-16 that you have prepared.
• 1x BearingLockTool.stl 
  It is used to lock the bearing from spinning and securely tighten the threaded stem.

Assembly: 

Attach the caster by screwing it into the foot. Use the bearing lock tool for the final tightening. Repeat this for all 4 feet. Be careful not to overtighten!

Notes:

• The wheel diameter I used is 50mm (2 inches).
• There are no changes to the position, size, or mounting method of the threaded holes compared to the original design https://www.printables.com/model/1104042-prusa-core-one-feet.