Doors of Durin LOTR Magnet (multi-color)(8x3mm magnets)

Pictured Examples printed on a BambuLab X1C (Textured PEI)

Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). On this one, I did set the outline object to green instead of black, and then paint brushed the bottom of the wizard's robes to cap off and paint bucket fill his outline as black without changing the entire outline object's color from green.

8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

Hope you enjoy!

(see my profile for other multi-color prints)