February 23, 2025
Description
Compact case for USB-C female power module. I use it to convert various devices to power from USB instead of batteries or other type of power supplies.
Prints on front face (with connector hole) with no supports.
Module snaps into case. Just push it in al the way and then down to lock it. It stays foot and cannot fall out. You need tweezers or pliers to get it out.
I use 1.7 mm screws to attach case to device. Screw holes centers are 6 mm from the front face and distance among hole centers is 12 mm.
Category: ElectronicsLicense:
Creative Commons — Attribution — Noncommercial
8
Pedja
