Side panel dry box mod Voron Trident (or similar designs)

You want to use all that space left and right of the print bed on the Printers like Voron Triden or printer with similar configuration.

Here is a mod that can change all that empty space to useful dry box compartment. (passive / active using the chamber heating)

The mod require making a new side panel or modifying the existing one and cutting a 220x220 mm hole in it the side. The hole should be cut in a way so it does not interfere with z gantry and xy gantry. There should be enough space. 

The parts should be printed from at least from PETG due to exposure to heat. ABS/ASA is better.
Box is made from 3 parts. 
Cover (best printed with transparent PETG + colored PETG for a couple of top layers for nice two color effect)
Box and Bottom should be screwed and glued together for rigidity.
There are 2 PTFE filament tube options inside and outside way 
Hardware needed:

12x M3x20 cylindrical screw (NOT stainless steel!!!!)
12x Fi5x3mm round magnets to glue them in to the cover. 
1m A 2mm silicon seal line can be added to the groove 
2x fi 5mm rod l=81mm
12x m3x15 selftaping screw
1x button head m3x10 screw
14x safety lock nut 

1x round temperature humidity meter https://www.aliexpress.com/item/1005006911300702.html

This mod is not tested, i did not yet made one for my printer. So double check if it is good for your printer. That is why im providing STEP. So you can check and modify accordingly..