Creality CFS RFID-reusable-spool-hex

Loved the version 3 and 7 posted by MediaMan3D. They do work well with the V-Spooler from Fryby Additive.

https://makerworld.com/en/models/98832
and
https://www.printables.com/model/684376

But I needed to adapt it to work with the Creality CFS RFID system as well.

I cleaned up some of the edges under the label on the snowflake version. 

Then added a round dish to accommodate the 1" (25mm) MIFARE 1k RFID tags that can be programed via the “RFID for CFS” app. https://play.google.com/store/apps/details?id=com.lot38designs.cfsrfid&pcampaignid=web_share

RFID Tags can be found here: https://www.amazon.com/dp/B081CFXCBJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Added a snap in cover for the RFID tag. (I tried to use a pause to place the tag and print over it to hide it in the middle of the print, but the tag kept warping during the next layer bridging.) So I made a cover that snaps into a small groove. For me I found the cover snaped in, but was a little loose at a size of 27.1mm. However it was a bit tight and bulged at 27.2mm. You may need to adjust the scale of just the cover in your slicer depending on your tolerances.