270 Degree Hinge for Elegoo Centauri Carbon

Required Stls:

• 1x hinge_upper
• 1x hinge_lower
• 1x arm_upper
• 1x arm_lower
• 2x nut_block
• *4x plastic_spacer

*The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass.

Required Hardware:

• 4x m3 8mm Socket Cap Screws (for side panel)
• 4x m3 12mm Socket Cap Screws (for glass panel)
• 2x m3 30mm Socket Cap Screws (for hinges)
• 6x m3 Nuts
• 4x m3 washers thickness between .5mm and .7mm (for arms)
• 4x washers from existing hinge

Installation instructions can be found in the files section if you need them. It seems newer batches of the CC have the hinges glued to the door. If yours are glued you will need to unscrew the original hinges before you can remove the door.

Notes: Print the plastic spacers with wall print order outer to inner, the rest can be printed inner to outer for better overhangs. .2 layer height

Some addons for the hinge can be found here: https://www.printables.com/model/1213120-extras-for-270-degree-hinge