February 24, 2025
Description
Material: PLA (you don't want it flexing, so don't use PETG, etc. it will be worse)
Perimeters: 7
Infill: Gyroid, 7%
Tips:
- Flip it upside down, text down on the print bed, it'll look nicer
- For more strength print it hotter than usual starting from the 2nd layer, I went 10C higher
- Use a single perimeter for the 1st and top layers, it'll look nicer (or just start from my 3mf, it has it setup already)
License:
Creative Commons — Attribution
8
GP
