February 23, 2025
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113.15x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: (You can use other brands provided you can find close enough colors to match)
PLA PolyLite Black Transmission Distance: 0.3
PLA Protopasta Blue Wonder Glitter Transmission Distance: 9
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Wine Red Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Protopasta Partly Sunny Yellow Transmission Distance: 12
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Wonder Glitter
At layer #11 (0.96mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Wine Red
At layer #17 (1.44mm) swap to Orange
At layer #20 (1.68mm) swap to Partly Sunny Yellow for the rest.
License:
Creative Commons — Attribution — Share Alike
MisFyts 3D
