Husky Build-Out 2-Drawer Bottom Drawer Dividers

Adapters for creating dividers in the bottom drawer of the Husky Build-Out 2-Drawer Tool Box using 1/2" or 1/4" plywood. These allow you to divide the bottom drawer into vertically or horizontally.

There are two types of dividers for plywood width. 

1. Shorter divider adapters that sit on the top of the ridges that run along the lines that divide the drawer into thirds. 
2. Longer divider adapters designed for sections where there are no ridges underneath. 

Approximate lengths for plywood dividers:

Printed using a 0.40mm nozzle in matte PLA with a layer height of 0.28mm.