Creality K1 Max 8mm LED Strip Holder

This is remixed from FunFunBoy's model. I was inspired by other models for the same purpose of mounting an LED strip on the K1 max. Like the original model use ASA or ABS to withstand the heat and not warp.

A slot style hole was used to make installation more forgiving, and four holes used to be able to fit either side. Remove the existing short screw and replace with an m3 screw that is longer. I used one with about 12.5mm of threads. Then a washer and nut on the other side.

The LED Neutral white 4000K, 24V is from AliExpress.
The JST 2 pin connectors is from Amazon.