MMU3 Buffer Plate Holder - Enclosure Mount

Recommended print settings:

• Material:  PLA / PETG
• Layer Height: 0.15 mm or less
• Infill % : 50+
• Supports: No
• Print Orientation: Default as modeled
• Brim: Optional

Installation instructions:

1. Remove plugs in the enclosure plexiglass in the holes you wish to use - press them out from the inside.
2. Use the “screw pulling technique” to seat the M3 nut in the new plate holder.
3. Remove the existing plate holder from your buffer (there are 2).
4. Install the new plate holder in each location.
5. Use the available enclosure holes to mount the buffer assembly.