Modular Cricut Vinyl Storage/Organizer

Update: Jan 19th - Got rid of the aligner tabs, they served no major benefit to the design and overlaps should be more than sufficient. 

Modular wall mounted vinyl/rolls storage for Cricut, Scisor or any other brand. 

Print only the Top and Bottom x2 for a complete set, print the Middle for an additional 2 racks, but add as many Middles as you want. Parts interlock loosely to help with alignment and mounting, but are not intended to be a snap fit so don't worry too much about printer tolerance. Glue if desired, or just screw through the combined sections to hold them together against the wall.

Bottom part features a small hanger tab for hanging Cricut Mats, make sure this is supported for successful printing.

Printing:

Turn off Skirt to fit on Mini build plate without issue, but recommending using a 2mm minimum Brim to fit on Prusa Mini as the parts are fairly thin and may need some help with adhesion. 

Printable on Prusa Mini+

Recommend using 20% infill and 0.6mm nozzle.