March 22, 2026
Description
Prints nicely with PLA at 0.2mm, 0% infill and 2 or 3 perimeters.
If you have any multicolor/rainbow filament I very much recommend using that, it looks great!
ETA: So I previously suggested printing it upright with snug supports, since they held up fine and came off far more easily than the organic ones (which were a pita to get off). Well, after printing 2 dozen eggs with absolutely no issue suddenly the printer vibrations are shaking the eggs loose from the supports? I have no idea why it is a problem now, I'm even using the same filament. Maybe turn down the speed and/or print a test egg?
License:
Creative Commons — Public Domain
Arons 1A3D4U
