January 18, 2022
Description
Teufel Remote Control Holder
you can attach it with double-sided tape
it has an angle of 45 degrees so that the remote control is easily held and therefore does not wobble around
when you have ideas to improve it let me know it
print it like on the 2nd picture
08.03.2021
I made a V2 with rounded edges and two versions with mounting holes
small holes: inside 3.5mm
lowering 5.5mm
large holes: inside 4.5mm
countersink 10.5mm
Printer Brand:
Anycubic
Printer:
All-metal Mega
No
Supports:
Yes
0,15
Infill:
100
Notes:
i printed it with tree support but i think it will work without it :)
please upload a photo of your print and i will try to improve it if there is a problemLicense:
Creative Commons — Attribution
Raphhorn
