BUTTON - GUESS WHO?

After uploading these photos I've seen the “hairy bits” that are not visible to the naked eye - sorry - these are rather large enlargements which show every defect! 

This button is Size L32 (20mm diameter) designed to be printed in three colours by any printer and scaled with the use of your slicer.

There's no need to stick with these colours with the three colour change stops in the gcode you have a lot of flexibility. For a bit of extra zing and an enamelled look, clear coat with acrylic.

If you wish to print in multi colours please do NOT alter the Z height when scaling the model for slicing.
 
The printed examples and gcode have been prouced using a 0.4mm nozzle printed at the standard "0.1mm Detail" setting on Prusa Slicer, with top fill pattern set to “Concentric”. 

Printed with Prusament PLA Lipstick Red, "made for Prusa PLA White and Prusament PLA Azure Blue then (the glossy one) finished with six coats of clear acrylic with no other surface pre finishing.

The photo with three buttons illustrates the differences between, off the printer (three colour and white) and the clear finished three colour print.

I shouldn't have to add, but I will,  that cold or warm wash only will ensure that your buttons remain buttons.
 

My other buttons may be found here:https://www.prusaprinters.org/social/79444-peter-h/collections/110372