TC1 Component tester power switch plate

A plate for the topside of the tester to add a small slide switch, this let you completely disconnect the battery when not in use to prevent accidental power on and battery drain when stored.

The pins sticking out on the inside are heatstakes, melt and squish them with a soldering iron on low temperature with a piece of kapton tape between to not gunk up your iron (just wait until the plastic cooled before pulling the kapton away.

Print Settings

Printer Brand:

Prusa

Printer:

**Rafts:**

Yes

Supports:

**Resolution:**

0.2 mm

Infill:

Notes:

It's printed on an angle with raft and supports to deal with overhangs and protrusions.

Post-Printing

The pins sticking out on the inside are heatstakes, melt and squish them with a soldering iron on low temperature with a piece of kapton tape between to not gunk up your iron (just wait until the plastic cooled before pulling the kapton away.

How I Designed This

Designed with Onshape. https://cad.onshape.com/documents/1a4571b2497926e79f3be51e/w/009dd1201fef4399502ca5bf/e/1028c0e85e07b371a1c59c40?renderMode=0&uiState=67b91546f77146235c95678d

Category: Tools