January 19, 2022
Description
Modified Part Cooling plate for Qidi X-Plus and X-Max BMG V6-Extruder Mod by Chad Wills.
Make sure to print with a nozzle not bigger than 0,4mm due to thin wall sections.
Do not use 100% fan speed for bridging sectionswhen using this cooling plate as, the airfolw then is typically too strong and blows the bridging filament away.
Printer:
Qidi X-Plus
Rafts:
No
No
Resolution:
0.2
25%
Filament: Colorfabb PA-CF Black
Notes:
Use a filament thats capable of withstanding higher temperatures then you plan to use on your heatbed, as i had a few plates distort when printing with bed temperatures higher than 100°C.
If the walls around the air outlets look strange in your slicer, try to toggle "thin walls" option.License:
Creative Commons — Attribution
7
El_Barto
