benchy wave runner

This model will finaly put your BENCHY on some waves!
supper Simple to build, no Supports, Easy print.

The model does not include the benchy itself… get any benchy and place it on the contraption.

Print:

no supports, 0.2 layer, any material.

assembly:  

1. fit the axle with the cap.
2. place 5 “benchi wave - rake” on the axel. all facing the same direction but rotated one face of the axle compared to the previous one.
3. place the spacer on the axle.
4. place 5 more “benchi wave - rake” in the sam way.
5. place the “rotating knob” and its handle.
6. place the axle on the bottom cap and place the housing over it.
7. place all 10 “pinion” in place (leave the middle hole free.
8. place boat pinion in the middle.
9. put the boat plate in place with a 4 mm dowel