Soap dispenser

Print settings:

• Perimeters: 4
• Solid layers Top / Bottom: 5 / 5
• Scarf joint placement: Contours
• Material: PETG

Optional Modifier:

• Range 0.00-141.00 mm
  • Fuzz skin: 
    • Outside walls
    • point distance: 2mm
    • thickness: 0.1 mm

Required hardware: soap dispenser pump 28-400 (bottle neck: diameter 25 mm with one thread).

I printed the soap dispenser bottle (SoapDispenser.stl) with pure PETG, so the bottle is partially transparent. The pump was reused from a disposable soap dispenser. 

Attached you will find:

• SoapDispenser.stl - capacity about 500ml;
• SoapDispenser_300.stl - capacity about 300ml;
• ThreadTestSP28400.stl - test piece to check fitting with soap dispenser pump.