Ventilkappe

Hey there!

Looking for a valvecap for my motorcycle i didnt find one,  so I decided to make my own. It was a little bit tricky concerning the threadcontruction, but after a few prototypes it worked perfectly, as you can see on the pictures. After screwing the valvecap once or twice on and off the valve, the thread in the valvecap worked very well.

Its printed with the Prusa MK4 and Prusament PETG@

• Printtemperature: 250°C
• Bedtemperature: 90°C
• Layerheight: 0,10mm