Makita Battery Einhell Tool Adapter

ATTENTION:

You need to be able to split the tool along the Battery bay.

You Need:

• 1x all 3 printed parts
• 1x (M)3x8mm countersunkscrew
• 2x (M)3x6mm allenkey bolt
• 2x 54x19x1mm metalstrip as contactors for the battery, need to be bend in shape
• glue

Instructions:

1. Print all the parts
2. Bend the metal strips 29-16-9 and place it in the terminalblock
3. open the tool
4. cut off the original batteryconnector
5. put the wires through the “Makita_Battery_Einhell_Tool_Adapter_ToolAdapter”
6. solder the wire accordingly to the metalstrips
   • the polarity is printed on the Makita battery 
7. glue the terminalblock in the “BatteryHolder”
8. screw the “ToolAdapter” to the ”terminalblock" and the “BatteryHolder”
9. place the adapter like a battery in the tool
10. close the tool

The filament I used is the:

DasFilament FireRed