The Ultimate Benchy Nook V.1.0

You are Troubeld with lots of Benchys, unorganized in a random box? Or you are Printing a lot of very cool new Benchys ?
Say no More! The Benchy Book Nook is here!

Display your Favorite Benchys of All time and give them the place they rightfully deserve!

There is a Version with LED-Stripes, which is more involving and uses Multicolor or Colourchanges or a simpler and slimmer one with less Filament.

Displays 19 Benchys !

Insert them From Back to Front, some have to be glued in (I recommend Hot Glue or double Sided Tape) And you might not want to glue all of them In, if they are Subject to change.

Printing on the XL -5T or 2T

Main Color as you want

Second colour should be transparent, if you use the LED Version

Third Color For the Text (Or textless version)

Material: PLA or Petg

2 Perimeters 10% infill 

LED Instructions (if you dont use the PS 3mf File):

Load Main Body

Add the negative Volume for the LED Channels It is easy to Line up with the File I gave

Add a Modifier for the center- LEDs (Transparent Filament)

Add a Modifier for the middle LEDs (If printed on a big Single Colour Printer, you could just change the colour two times)

Add a Print pause to insert the LED-Stripes

Printing on smaller Printers:

For no Led's you can print the No-Led whole Smaal Version (242y x 151x x 125z mm) 

Center Core is the Same as the big one.

You need:

About 650g Of Filament

2 Led Stripes

RGB Controller of them (if needed)

Little LEDs, or part of the Stripe and some Soldering experience

19 Benchy's of your choice (not all remixes will fit)

Have Fun, Share you Models and Remixes or Tips to make it even more Epic.