Anio 6 Kids Watch holder

This magnetic wall mount / desktop stand integrates with the Anio 6 charging cable. The tolerances are tight, so if you print this in PETG, rescale the model to about 100.3% to account for shrinkage.

You need 12mm/3mm flat round magnets to mount it to a magnetic board as you see in the photo. You need the mirrored table stand variant I provided if you intend to use it on a desktop instead (otherwise the charging cable gets in the way). Bend the mount gently to snap in the charging cable.

I printed this with 0.15mm layers to account for the round fillets, but it's not critical.