Rezz portal mRk 2

BEHOLD

A portal I designed based on a cover art for Rezz's concert. (Cow Palace). Now you can have a mini Rezz portal at home to remind you how amazing that concert was. 

I have included the sliced profile I used for my mk3s, as well as, the individual sliced parts. I've also included the entire piece as its own. I have not tried printing it in one piece, though, organic supports (only on the build plate) should suffice. 

Print at 15% infill, 0.20 layer height, 2 walls, and 6 top layers. Have Organic supports enabled to ensure the hands are printed properly, and be extra extra careful when removing supports around the chains! If they break or come loose, its OKAY!! The ruined look is what I imagined when re-creating this portal.

If you are experiencing adhesion problems, slice 1mm from the bottom of the base first, then try using a brim. 

The wireless charger I used is frustratingly, no longer available. I will be working on finding a new wireless charger that can be found easily and will update the file later on when I do.

 The area for the charger is slightly bigger than 72 x 72 x 10.55mm. If you are unable to find a wireless charger that can fit in this spot, then print out the “No Wireless charger” block and place it where the wireless charger would go. So your phone can lay flat with no issues.

For the lights, I used random strip lights I found at the dollar store. Feel free to use any light set-up that you think looks and works best for you! 

Happy Printing! Let me know if you run into any issues while printing and don't forget to post a make!