Manufacturing instructions:
- Material: PETG or PC Blend
- 3D Printer: FDM 3D printer, print time 10,5 hours (with MK4S)
- Slicer settings: 0.2 layer height, print each part separately, 6 perimeters, 60% infill, no supports.
- Post processing instructions: Clean the stringing
- Assembly instructions:
- Insert the Starlink Attachment to the Kickstand from the original model, secure with retainers to the starlink dish. Secure with 4pcs M6x20 bolts
- Attach the Bottom stand to the solid surface using 4pcs M6 bolts.
- Slide the Starlink Attachment into the Bottom stand, and secure with one M6x50 DIN 912 bolt, do not tighten fully.
- Set the required angle and tighten the M6x50 bolt.
License:
Creative Commons — Attribution — Share Alike
Médecins Sans Frontières
