Assembly suggestions:
- Soften the adapter plate with a heat gun if fitment to grinder chassis is poor
- Print with PETG or similar at 100% infill
V6 Update:
- Redone from scratch based on new measurements
- Model comes in two friction-fit parts; adapter plate and spout
- Adapter plate has ears and a pinched-in area to make it easier to affix screws
- Angled spout seems to be the best design; curved spout had retention issues
v7 Update:
- Seems to work fine as-is with inclined stand; no adjustment needed
- Adjusted angle between screw holes from 57 to 55 mm
License:
Creative Commons — Public Domain
0x64
